Cement mixing plant belongs to large construction machinery and equipment, and the whole mixing plant needs to operate more matters in the production process, so it is more important to understand how to operate the equipment and how to operate correctly, which can reduce the occurrence of more equipment failures and accidents. Here is to understand some concrete mixing plant operating procedures and precautions.
1.Non-professional personnel are prohibited from operating and maintaining the concrete mixing plant equipment. Operators should be due diligence, strictly in accordance with the operating procedures. Mixing station in the construction process if there is a problem immediately stop, it is strictly prohibited to work with disease equipment, operators are prohibited to leave the work.
2. Check whether clutch and brake accessories are normal and whether steel wire rope is broken and damaged before working in concrete mixing plant. Whether the equipment is in trial operation. If the stirring cylinder rotates smoothly, does not vibrate, does not deviate from the direction, the hopper around and feed door rotates normally, the structure below the hopper is normal, you can work.
3.The supporting equipment of the concrete mixing station can not be overloaded in the production process. During the operation of the mechanical equipment, force or other objects shall not reach into the mixing cylinder to touch, clean and repair.
4.When the hopper rises in the concrete mixing station, no one can be under the hopper. If maintenance is needed under the bucket, the switching power supply should be turned off, and the hopper can be fixed with a strong chain rope before it can be carried out.
5.concrete mixing station hopper should be slow down, down speed can not be too fast, if too fast may damage parts or cause common failures. Do not feed until the hopper has stopped steadily.
6. No one shall arbitrarily change the electrical device or control circuit, and shall not arbitrarily change the setting value and specification of the electrical device.
7.Site power distribution and safety protection shall comply with the current national safety codes and standards for power supply. Electrical equipment shall be connected to zero or ground in strict accordance with regulations to prevent occurrence.
Post time: Feb-24-2023